background image

3

Important Safety Information

These warnings are provided in the interest of your safety. You MUST read them carefully
before installing or using the appliance.

Installation

• This oven must be installed by qualified personnel in

accordance with existing rules and regulations.

• This oven is heavy. Take care when moving it.
• Remove all packaging, both inside and outside the oven,

before using the oven.

• Do not attempt to modify the oven in any way.
• The use of a gas cooking appliance results in the

production of heat and moisture in the room in which
it  is installed. Ensure that  the kitchen is well
ventilated: keep natural ventilation holes open or
install a mechanical ventilation device (mechanical
extractor hood).

•  Prolonged intensive use of the appliance may call for

additional ventilation, for example opening a window,
or more effective ventilation, for example increasing
the level of mechanical ventilation where present.

Child Safety

• This oven is designed to be operated by adults. Do not

allow children to play near or with the oven.

• The oven gets hot when it is in use. Children should be

kept away until it has cooled.

During Use

• This oven is intended for domestic cooking only. It is not

designed for commercial or industrial purposes.

• Appliances become very hot with use, and retain their

heat for a long period after use. Care should be taken
to avoid touching heating elements inside the oven.

• Do not block any of the oven vents. Never line any part

of the oven with aluminium foil.

• Do not allow heatproof cooking material, e.g. roasting

bags, to come into contact with oven elements.

• Never place plastic or any other material which may melt

in or on the oven.

• Do not place sealed cans or aerosols inside the oven.

They may explode if they are heated.

• Do not hang towels, dishcloths or clothes from the oven

or its handle.

• Do not use this oven if it is in contact with water and never

operate it with wet hands.

• Take great care when heating fats and oils as they will

ignite if they become too hot.

• Always use oven gloves to remove and replace food in the

oven.

• Ensure that all control knobs are in the OFF position

when not in use.

• Do not leave cookware containing foodstuffs, e.g. fat or

oil in or on the oven in case it is inadvertently switched
ON.

• When using other electrical appliances, ensure the

cable does not come into contact with the hot surfaces
of the oven.

Maintenance and Cleaning

• Only clean this oven in accordance with the instructions.
• This appliance cannot be cleaned with steam or with

a steam cleaning machine.

• The oven should be kept clean at all times. A build-up of

fats or other foodstuffs could result in a fire, especially in
the grill pan.

• Always allow the oven to cool down and switch off the

electrical supply before carrying out any cleaning or
maintenance work.

Service

• This oven should only be repaired or serviced by an

authorised Service Engineer and only genuine approved
spare parts should be used.

The manufacturer disclaims any responsibility
should these safety measures not be carried out.

 Environmental Information

• After installation, please dispose of the packaging with

due regard to safety and the environment.

• When disposing of an old appliance, make it unusable,

by cutting off the cable. Remove any door catches, to
prevent small children being trapped inside.

• The symbol 

 on the product or on the packing

indicates that it should not be treated as normal
household waste but must be taken to an appropriate
collection point for the recycling of electrical and
electronic equipment. Correct disposal of this appliance
will help prevent possible negative consequences for
the environment and the health of persons.
For more detailed information about the recycling of
this product, contact your local council office or waste
disposal service, or the shop where you purchased
the product.

Keep this instruction book for future reference

and ensure it is passed on to any new owner.

Summary of Contents for ZGT 1





















Reviews: