background image

WARNING! Risk of damage to the

appliance.

• Do not keep hot cookware on the control panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or cookware fall on

the appliance. The surface can be damaged.

• Do not activate the cooking zones with empty

cookware or without cookware.

• Do not put aluminium foil on the appliance.

• Do not use the solid hot plate for direct cooking.

It must be used with appropriate cookware.

• Use only stable cookware with the correct

shape and diameter larger than the dimensions

of the burners.

• Make sure cookware is centrally positioned on

the burners.

• Make sure the flame does not go out when you

quickly turn the knob from the maximum to the

minimum position.

• Use only the accessories supplied with the

appliance.

• Do not install a flame diffuser on the burner.

• The use of a gas cooking appliance results in

the production of heat and moisture. Provide

good ventilation in the room where the

appliance is installed.

• Prolonged intensive use of the appliance may

call for additional ventilation, for example

opening of a window, or more effective

ventilation, for example increasing the level of

mechanical ventilation where present.

• This appliance is for cooking purposes only. It

must not be used for other purposes, for

example room heating.

• Do not let acid liquids, for example vinegar,

lemon juice or limescale remover, touch the hob.

This can cause matt patches.

• Discoloration of the enamel or stainless steel

has no effect on the performance of the

appliance.

CARE AND CLEANING

WARNING! Do not remove the

buttons, knobs or gaskets from the

control panel. Water may get inside

the appliance and cause damage.

• Clean regularly the appliance to prevent the

deterioration of the surface material.

• Deactivate the appliance and let it cool down

before you clean it.

• Disconnect the appliance from the electrical

supply before maintenance.

• Do not use water spray and steam to clean the

appliance.

• Clean the appliance with a moist soft cloth. Only

use neutral detergents. Do not use any abrasive

products, abrasive cleaning pads, solvents or

metal objects.

• Do not clean the burners in the dishwasher.

DISPOSAL

WARNING! Risk of injury or

suffocation.

• Contact your municipal authority for information

on how to discard the appliance correctly.

• Disconnect the appliance from the mains

supply.

• Cut off the mains electrical cable close to the

appliance and dispose of it.

• Flat the external gas pipes.

SERVICE
• To repair the appliance contact an Authorised

Service Centre.

• Use original spare parts only.

5

Summary of Contents for ZGM62444XA





































Reviews: