57
GB
WHAT TO DO IF...
If the appliance is not working correctly, please check the following before
contacting the engineer:
Problems
Possible reasons and likely solutions
The freezer is connected to
the mains but the green lamp
does not light up.
There is no power to the mains or no contact between the plug
and the socket. Check plug fuse, try an alternative socket.
Increased noise
Check if the appliance: stands level on a smooth and firm base;
doesn’t touch any other electrical devices or furniture next to it.
While opening the door the
gasket comes off.
Insert the gasket into position by pressing the inner part of the
gasket. If the gasket has been contaminated with oily liquids, it is
necessary before inserting to clean the gasket and the groove in
the door with dish washing agent and wipe it dry before refitting.
The red signal lamp is
constantly switching on.
The door of the freezer is being left open too long. The freezer is
overloaded with fresh food. The top ventilation openings have
been obstructed. Too much dust has accumulated on the
condenser
12
and the compressor
13
. Keep to the requirements
of this Manual.
High temperature in the
appliance.
A lot of warm food recently loaded; doors have been opened for a
long time or too often.
Condensation forms on the
surface of the appliance.
High relative humidity (over 70 %).
If after the above checks, your appliance still does not operate correctly, contact your local
Service Force centre. Please note that it will be necessary to provide proof of purchase for
any in-guarantee service calls.
In-guarantee customers should ensure that the above checks have been made as the
engineer will make a charge if the fault is not a mechanical or electrical breakdown.
WARNING!
When requesting a repair to your
appliance, always quote the
information given on the rating
plate shown below.
Downloaded from Fridge-Manual.com Manuals
