background image

 

6

 

Door reversibility

 

Before carrying out any work on the appliance, 
unplug it from the power socket.

Remove the upper hinge (Fig. 5) and slide the top 
door off the middle hinge.

Remove the middle hinge, turn it through 180

 

°

 

 and 

refit it on the opposite side (Fig. 6) after having 
removed the plugs (F-Fig. 7) which mask the holes. 
The plugs must be refitted in the holes left open on 
the opposite side.

Refit the top door and the top hinge. Unscrew the 
left-hand levelling foot, which will be refitted on the 
opposite side. Unscrew the right-hand levelling foot 
(H), the corresponding hinge (I) and the stop (L) 
and refit all these on the left-hand side (Fig. 8).

Reverse the handles after having removed the clip-
in screw covers (Fig. 9). The unused holes are 
masked with plastic plugs which should be removed 
and refitted in the holes left open.

 

Attention

 

After completion of the door reversibility operation, 
check that the door gasket adheres to the cabinet. If 
the ambient temperature is cold (i.e. in Winter), the 
gasket may not fit perfectly to the cabinet. In that 
case, wait for the natural fitting of the gasket or 
accelerate this process by heating up the part 
involved with a normal hairdrier.

 

Fig. 5

D185

 

Fig. 6

Fig. 7

Fig. 8

Fig. 9

D045

E

F

D047

H

I

D537

L

D336

Summary of Contents for ZFC 67/14
















Reviews: