Product description
Cooking surface layout
1
2
3
4
180
mm
145
mm
1
Rear cooking zone 1500 W
2
Front cooking zone 1000 W
3
Power indicator
4
Control knobs
Electric cooking zones control knobs
Symbol
Function
0
off position
Symbol
Function
1
minimum heat
6
maximum heat
Daily use
Warning!
Refer to the Safety chapters.
To switch on and increase the heat setting turn
the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch
off turn the knob to the 0.
Power indicator is activated when either of the
zones are turned on, and will stay on until the
cooking zones are switched off.
Before first use
Put cookware containing water on each cook-
ing zone, set the maximum position and operate
the appliance for 10 min. This is to burn off the
residue in the appliance. After that, operate the
appliance at minimum position for 20 min. Dur-
ing this period, an odour and smoke can occur.
This is normal. Make sure that the airflow is suf-
ficient.
Rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
than usual plates.
The red dot is painted on the surface and can
come off after some time. It does not have an
effect on the performance of the appliance.
The rapid hot plate can smoke and make an
odour when you use it for the first time. The
smoke and an odour will go off after a while.
Helpful hints and tips
Warning!
Refer to the Safety chapters.
Energy saving
• If possible, always put the lids on the
cookware.
• Put cookware on a solid hotplate before
you start it.
• Stop the solid hotplate before the end
of the cooking time to use residual heat.
• For satisfactory results, the diameter of
pans and cooking zones must have the
same dimensions.
Cookware
14
www.zanussi.com
Summary of Contents for ZEE3921I
Page 49: ...49 www zanussi com ...
Page 50: ...50 www zanussi com ...
Page 51: ...51 www zanussi com ...