Programme
1)
Degree of soil
Type of load
Programme
phases
Duration
(min)
Energy
(kWh)
Water
(l)
Normal soil
Crockery and cut-
lery
Prewash
Wash 65 °C
Rinses
Dry
90 - 100
1.1 - 1.2
15 - 16
2)
Fresh soil
Crockery and cut-
lery
Wash 65 °C
Rinse
30
0.8
8
3)
Normal soil
Crockery and cut-
lery
Prewash
Wash 50 °C
Rinses
Dry
160 - 170
0.8 - 0.9
12 - 13
4)
All
Prewash
12
0.1
3.5
1)
The pressure and the temperature of the water , the variations of the mains supply, the options and the
quantity of dishes can change the programme duration and the consumption values.
2)
With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3)
With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
4)
Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and
bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
Write down the product number (PNC) that is on the rating plate.
Options
Acoustic signals
The acoustic signals operate in these condi-
tions:
• The programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: On.
It is possible to deactivate the acoustic
signals.
How to deactivate the acoustic signals
1. Press the on/off button to activate the appli-
ance. Make sure that the appliance is in set-
ting mode, refer to ‘Setting and starting a
programme’.
2. Press and hold function buttons (
B
) and (
C
)
at the same time until the indicators of func-
tion buttons (
A
), (
B
) and (
C
) start to flash.
3. Press function button (
C
),
• The indicators of function buttons (
A
)
and (
B
) go off.
• The indicator of function button (
C
) con-
tinues to flash.
• The end indicator comes on.
4. Press function button (
C
). The end indicator
goes off, the acoustic signals are deactiva-
ted.
5. Deactivate the appliance to confirm the set-
ting.
18
www.zanussi.com
Summary of Contents for ZDV 14001FA
Page 66: ...66 www zanussi com ...
Page 67: ...67 www zanussi com ...
