Alarm code
Problem
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 1 time intermittently.
The appliance does not fill with water.
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 2 times intermittently.
The appliance does not drain the water.
• The indicator of the set programme flashes contin-
uously.
• The end indicator flashes 3 times intermittently.
The anti-flood device is on.
Warning!
Deactivate the appliance before
you do the checks.
Problem
Possible solution
You cannot activate the appliance.
Make sure that the mains plug is connected to the mains
socket.
Make sure that there is not a damaged fuse in the fuse box.
The programme does not start.
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end
of the countdown.
The appliance does not fill with water.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
Close the water tap and contact the Service.
After the checks are completed, activate the
appliance. The programme continues from the
point of interruption.
If the problem occurs again, contact the Serv-
ice.
If other alarm codes appear, contact the Serv-
ice.
If the washing and drying results are not
satisfactory
Whitish streaks or bluish layers on
glasses and dishes
• The released quantity of rinse aid is too
much. Adjust the rinse aid selector to a lower
position.
• The quantity of detergent is too much.
25
www.zanussi.com
Summary of Contents for ZDV 14001FA
Page 66: ...66 www zanussi com ...
Page 67: ...67 www zanussi com ...
