Troubleshooting
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the ta-
ble). If not, contact the Service.
With some problems, some indicators flash continuously
and/or intermittently at the same time to show an alarm
code.
Alarm code
Problem
• The indicator of the set programme flashes continu-
ously.
• The end indicator flashes 1 time intermittently.
The appliance does not fill with water.
• The indicator of the set programme flashes continu-
ously.
• The end indicator flashes 2 times intermittently.
The appliance does not drain the water.
• The indicator of the set programme flashes continu-
ously.
• The end indicator flashes 3 times intermittently.
The anti-flood device is on.
Warning! Deactivate the appliance before you make
the checks.
Problem
Possible cause
Possible solution
The programme does not
start.
The mains plug is not connected in the
mains socket.
Connect the mains plug.
The appliance door is open.
Close the appliance door.
The fuse in the fuse box is damaged.
Replace the fuse.
The appliance does not fill
with water.
The water tap is closed.
Open the water tap.
The water pressure is too low.
Contact your local water authority.
The water tap is clogged or there is lime-
scale on it.
Clean the water tap.
The filter in the water inlet hose is clog-
ged.
Clean the filter.
The water inlet hose has a kink or a
bend.
Make sure that the position of the hose is
correct.
The anti-flood device is on. There are
water leakages in the appliance.
Close the water tap and contact the Serv-
ice.
The appliance does not drain
the water.
The sink spigot is clogged.
Clean the sink spigot.
The water drain hose has a kink or a
bend.
Make sure that the position of the hose is
correct.
24
