Programme
Degree of soil
Type of load
Programme phases
Options
3)
All
Prewash
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
3) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out
from the appliance.
Do not use detergent with this programme.
Programme
1)
Duration (min)
Energy (kWh)
Water (l)
85-95
1,8-2,0
22-25
100-110
1,4-1,6
19-21
30
0,9
9
130-140
1,0-1,2
14-16
12
0,1
5
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the
programme duration and the consumption values.
Options
Acoustic signals
The acoustic signals operate in these conditions:
• When the programme is completed.
• A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate the appliance.
2. Make sure that the appliance is in setting mode. Refer
to ‘SETTING AND STARTING A PROGRAMME’.
3. Press and hold the programme button until the pro-
gramme indicator (A) flashes and the programme in-
dicator (B) comes on.
4. Press immediately the programme button.
• The programme indicator (A) comes on with a
fixed light.
• The programme indicator (B) starts to flash.
5. Wait until the programme indicator (A) goes off and
the end indicator comes on (the programme indicator
(B) continues to flash).
• The acoustic signals are on.
6. Press the programme button. The end indicator goes
off.
• The acoustic signals are off.
7. Deactivate the appliance to confirm.
Activating the acoustic signals
1. Refer to ‘Deactivating the acoustic signals’, step (1)
through (4).
2. Wait until the programme indicator (A) goes off. The
end indicator is off and programme indicator (B) con-
tinues to flash.
• The acoustic signals are off.
3. Press the programme button. The end indicator
comes on.
• The acoustic signals are on.
4. Deactivate the appliance to confirm.
18
