background image

 

Depth cm

60,5

Electrical connection - Voltage -

Overall power - Fuse

Information on the electrical connection is given on the rating plate on the

inner edge of the dishwasher door.

Water supply pressure

Minimum

0,5 bar (0,05 MPa)

 

Maximum

8 bar (0,8 MPa)

Capacity

Place settings

9

Environment concerns

The symbol     on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local council, your household waste disposal

service or the shop where you purchased the product.
The packaging materials are environmentally friendly and

can be recycled. The plastic components are identified by

markings, e.g. >PE<, >PS<, etc. Discard the packaging

materials in the applicable container at the community

waste disposal facilities.

Warning!  To discard the appliance, follow the

procedure:

• Pull the mains plug out of the socket.
• Cut off the mains cable and mains plug and discard

them.

• Discard the door catch. This prevents the children to

close themselves inside the appliance and endanger

their lives.

Installation

Warning!  Make sure that mains plug is

disconnected from the mains socket during

installation.

Fitting under a counter

Put the appliance adjacent to a water tap and a water drain.

Remove the appliance worktop to install it under a sink

unit or a kitchen worktop. Make sure that the dimensions

of the recess agree with the given dimensions.

1

2

14

 

Summary of Contents for ZDS 2010





















Reviews: