Capacity
Place settings
9
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance
door shows the electrical connection data.
If the hot water comes from alternative sources of
energy, (e.g. solar panels, photovoltaic panels and
aeolian), use a hot water supply to decrease energy con-
sumption.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
Recycle the materials with the symbol . Put the pack-
aging in applicable containers to recycle it.
Installation
Installation under a counter
Put the appliance adjacent to a water tap and a water
drain.
Remove the appliance worktop to install it under a sink
unit or a kitchen worktop. Make sure that the dimensions
of the recess agree with the dimensions in the picture.
1
2
3
4
To adjust the level of the appliance
A correct level of the appliance lets the door to close and
seal correctly.
With an incorrect appliance level, the door does catches
on the sides of the cabinet.
Loosen or tighten the adjustable feet to make the appli-
ance level.
Water drain connection
1
Connect the water drain
hose to the sink spigot.
max 85 cm
min 40 cm
max 400 cm
2
14
