Warning! Deactivate the appliance before you do the
checks.
Malfunction
Possible cause
Possible solution
The appliance does not fill with water. The water tap is blocked or there is
limescale on it.
Clean the water tap.
The water pressure is too low.
Contact your local water authority.
The water tap is closed.
Open the water tap.
The filter in the water inlet hose is
blocked.
Clean the filter.
The connection of the water inlet
hose is not correct.
Make sure that the connection is cor-
rect.
The water inlet hose is damaged.
Make sure that the water inlet hose
has no damages.
The appliance does not drain the wa-
ter.
There is a blockage in the sink spi-
got.
Clean the sink spigot.
The connection of the water drain
hose is not correct.
Make sure that the connection is cor-
rect.
The water drain hose is damaged.
Make sure that the water drain hose
has no damages.
The anti-flood device is on.
Close the water tap and contact the
service centre.
The start of the washing programme
does not occur.
The appliance door is open.
Close the appliance door.
You did not press the start/cancel
button.
Press the start/cancel button.
The mains plug is not connected in
the mains socket.
Connect the mains plug.
The fuse in the fuse box is damaged. Replace the fuse.
The delay start is set.
• Cancel the delay start.
• When the countdown is comple-
ted, the washing programme starts
automatically.
After the check, turn the programme knob on the same
washing programme before the malfunction occurred. The
programme continues from the point of interruption.
If the malfunction occurs again, contact the service centre.
If the different alarm codes show, contact the service cen-
tre.
The necessary information for the service centre is on the
rating plate.
Record this information:
– Model (MOD.) ........................................................
– Product number (PNC) ..........................................
– Serial number (S.N.) ..............................................
12
