background image

15

External cleaning

Clean the external surfaces of the machine and

control panel with a damp soft cloth. If

necessary use only neutral detergents. Never

use abrasive products, scouring pads or

solvent (acetone, trichloroethylene etc....). 

Ensure that the seals around the door, the

detergent and rinse aid dispensers are cleaned

regularly with a damp cloth.

We recommend every 3 months to run a 65°C

wash programme without dishes using

detergent.

Prolonged periods of non-operation 

If you are not using the machine for any period

of time you are advised to: 

1.

Unplug the appliance and then turn off the

water. 

2.

Leave the door ajar to prevent the formation

of any unpleasant smells. 

3.

Leave the inside of the machine clean. 

Frost precautions 

Avoid placing the machine in a location where

the temperature is below 0°C. If this is

unavoidable, empty the machine, close the

appliance door, disconnect the water inlet pipe

and empty it. 

Moving the machine 

If you have to move the machine (moving

house etc....): 

1.

Unplug it.

2.

Turn the water tap off.

3.

Remove the water inlet and discharge

hoses.

4.

Pull the machine out together with the

hoses. 

5.

Only transport the dishwasher in an upright 

position, otherwise salt water may run out.

Environmental concerns

Packaging material

The packaging materials are environmentally

friendly and can be recycled. The plastic

components are identified by markings, e.g.

>PE<, >PS<, etc. Please dispose of the

packaging materials in the appropriate

container at the community waste disposal

facilities.

WARNING!

When a unit is no longer being used:
- Pull the plug out of the socket.
- Cut off the cable and plug and dispose of

them.

- Dispose of the door catch.

This prevents children from trapping

themselves inside and endangering their

lives.

Old appliance

The symbol 

on the product or on its

packaging indicates that this product may not

be treated as household waste. Instead it shall

be handed over to the applicable collection

point for the recycling of electrical and

electronic equipment. By ensuring this product

is disposed of correctly, you will help prevent

potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. 

For more detailed information about recycling

of this product, please contact your local city

office, your household waste disposal service

or the shop where you purchased the product.

156998720en.qxp  1/31/2007  4:22 PM  Page 15

Summary of Contents for ZDI 100

























Reviews: