Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Electronic
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
Manual adjustment
1
2
Turn the water hardness
dial to the position 1 or 2.
Electronic adjustment
1. Press the on/off button to activate the appliance.
2. Make sure that the appliance is in setting mode. Refer
to ‘SETTING AND STARTING A PROGRAMME’.
3. Press and hold function buttons (B) and (C) at the
same time until the indicators above function buttons
(A), (B) and (C) flash.
4. Press function button (A).
• The indicators above function buttons (B) and (C)
go off.
• The indicator above function button (A) continues
to flash.
• The display shows the setting of the water soften-
er. Example:
= level 5.
5. Press function button (A) again and again to change
the setting.
6. Deactivate the appliance to confirm.
Filling the salt container
Caution! Only use dishwasher salt. Other products
can cause damage to the appliance.
Water and salt can come out from the salt container when
you fill it. Risk of corrosion. To prevent it, after you fill the
salt container, start a programme.
1
2
3
Put 1 litre of water in the
salt container (only for the
first time).
4
5
6
7
www.zanussi.com
Summary of Contents for ZDF4013
Page 1: ...EN User manual Dishwasher ZDF 4013 ...
Page 15: ...15 www zanussi com ...
