Zanussi ZDF4013, User Manual

Page: 14 / 16

Capacity Place settings 12
Power consumption Left-on mode 1.90 W
Off-mode 0.10 W
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease
energy consumption.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
• Discard correctly the packaging material. Recycle the
materials with the symbol .
Installation
Warning! Refer to “SAFETY INFORMATION”.
Installation under a kitchen counter
Put the appliance adjacent to a water tap and a water
drain.
Remove the worktop of the appliance to install it under a
sink unit or a kitchen counter.
570-600 mm
600 mm
820 mm
1
Make sure that the dimensions of the recess agree with
the dimensions in the figure.
1
2
2
3
4
3
4
Loosen or tighten the adjustable feet for a correct level of
the appliance. With a correct level the appliance door
closes and seals correctly.
Install the appliance worktop to the appliance if you want
to use the dishwasher as a freestanding appliance.
The plinth on freestanding appliance is not adjustable.
14
www.zanussi.com