Zanussi ZCM561MW1, Operating & Installation Instructions Manual

Page: 18 / 24

18
Pipe
flexible
Pipe
flexible
Rigid pipe
•
Rigid pipe with screw nut.
2. For cylinder butane propane gas:
•
We advise you to use flexible pipe according to
the national rule in force of minimum 1 m; this
length is chosen depending on the position of
the connection to the gas supply;
•
For the old butane installations you can use a
flexible rubber pipe of max 1,5 m and 6 mm
diameter, mounted with the special butane
holder (see figure);
•
Fix it well by means of a collar for each end.
Fitting
Necklace
Holder
butane
Flexible
rubber
The appliance can be connected to the gas supply on
the right by one print of connection. The end of the
distributing pipe is threaded.
It is necessary to route the connecting hose (flexible)
at the back of the appliance as shown in the diagram.
Ensure that the rubber hose is not in contact with any
part of the hatched area shown in the diagram. The
hose has to be fixed in the support by means of the
clamp supplied. The hose should not have narrow
curves or throttlings. Check tightness with soapy
water.
clamp
connection of
flexible hose
Change of gas
Your cooker is foreseen to work with natural gas,
propane or butane. It is not foreseen for butane or
propane air.
For changing the gas type it is necessary to:
•
replace the nozzles (hob);
•
adjust the minimum level;
•
check the gas connection.
Stick the label delivered with the appliance
(spare nozzles, corresponding to the type of gas
used).
Specification nozz les
Table no. 1
Cat : II
2H 3B/P
Cons.
Burner
Nom.
power (kW)
Reduced
power (kW)
Gas type
Pressure
(mbar)
By-pass
(mm)
Nozzle
diameter
(mm))
g/h
Rapid
2,60
2,50
2,20 0,75
0,72
0,63 Natural gas G20
Butan G30
Propan G31 20
30
30
0,42
1,13
0,77
0,77 -
181,78
157,11
Semi-
Rapid
1,90
2,00
1,70 0,45
0,43
0,38
Natural gas G20
Butan G30
Propan G31 20
30
30
0,32
0,96
0,71
0,71 -
145,43
121,40
Auxiliary
1,00
1,00
0,85 0,35
0,35
0,31 Natural gas G20
Butan G30
Propan G31 20
30
30
0,30
0,70
0,50
0,50 -
72,71
60,70