background image

10

Using the Conventional Oven

When using this setting, heat comes from both the top

and bottom elements. This allows you to cook on a single

level and is particularly suitable for dishes which require

extra base browning such as pizzas, quiches and flans.
Gratins, lasagnes and hotpots which require extra top

browning also cook well in the conventional oven. This

form of cooking gives you the opportunity to cook without

the fan in operation.

How to Use the
Conventional Oven

1. Turn the oven function control knob to the required

cooking function (

).

2. Turn the thermostat control to the required temperatu-

re.

Top oven element only 

This function is suitable for finishing cooked dishes, e.g.

lasagne, shepherds pie, cauliflower cheese etc.

Bottom oven element only

 

This function is particularly useful when blind-baking

pastry. It may also be used to finish off quiches or flans

to ensure the base pastry is cooked through.

THINGS TO NOTE

l

The oven light will come on when the oven function

control knob is set.

l

The thermostat control light will remain on until the

correct temperature is reached. It will then cycle on

and off to show that temperature is being maintained.

The  middle  shelf  position  allows  for  the  best  heat

distribution. To increase base browning simply lower the

shelf position. To increase top browning, raise the shelf

position.
The material and  finish of the baking trays and dishes

used will affect base browning. Enamelware, dark, heavy

or non-stick utensils increase base browning, while oven

glassware, shiny aluminium or polished steel trays reflect

the heat away and give less base browning.
Always place dishes centrally on the shelf to ensure even

browning.
Stand dishes on suitably sized baking trays to prevent

spillage onto the base of the oven and make cleaning

easier.

Do not

 place dishes, tins or baking trays directly on the

oven base as it becomes very hot and damage will occur.
For faster preheating use the fan oven function to preheat

the oven until the oven indicator neon goes out, then

swich the selector to the conventional oven setting.

Single  level  cooking  gives  best  results.  If  you

require more than one level cooking use the fan

oven function.

Hints and Tips

F

Summary of Contents for ZCM 631

























Reviews: