44
Ignition of the burners
•
Push the knob and turn it left to the symbol “big
flame” and ignite with a match.
•
Release the knob after 10 seconds (until the
safety valve automatically keeps the burner
lit)
and check that the burner is ignited.
•
Upon ignition, adjust the flame as required.
If for any reason the flame should extinguish turn
off the relevant control knob, leave for at least
one minute and then re-ignite.
If after a few attempts the burner does not ignite,
check that the burner ring and its cap are
correctly positioned.
Extinguishing of burners
Turn the knob clockwise to mark « ».
Do not put anything on the hob that is
liable to melt.
Before closing the lid ensure the control
knobs are off.
Selecting the Correct burner
Above every knob there is a symbol for the
corresponding burner.
For good cooking results, always choose pans,
which correctly fit to the diameter of the burner
used (see figs).
Choose thick, flat bottom pots
.
We recommend the flame is lowered as soon as
the liquid starts boiling.
For a correct ignition always keep the burner ring
and the spark plugs clean.
The following diameter pans can be used:
rapid burner
2,6kW - min. 165 mm
semirapid burner 2,0 kW - min. 140 mm
auxiliary burner
1,0kW - min. 80 mm
Accessories delivered with the
appliance
The following accessories are supplied with your
appliance.
•
Shelf for placing dishes on (roast, pastry
mounds)
The dish should be put in the middle of the
shelf to balance the weight.
•
Roasting
tray
It is used to collect juice when cooking in it,
place it on the shelf 2.
In addition to the accessories supplied we
recommend you only use heatproof dishes/pans
(according to the manufacturer’s instructions).
Good use
Bad use
(Power waste)
