Zanussi ZC345P, Instruction Booklet

Page: 8 / 12

Zanussi 8181455-00/0
6RPHWKLQJ 1RW :RUNLQJ
*%
%HIRUH
contacting your local Service Force Center check the following point:
3UREOHP 3RVVLEOH FDXVH 5HPHG\
,W LV WRR ZDUP LQVLGH WKH UHIULJHUDWRU
Set a lower temperature.
Put food products in the right place inside the refrigerator. See
the chapter ”Temperature inside the refrigerator”.
Distribute the food products to allow cold air to circulate
around them.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
,W LV WRR FROG LQVLGH WKH UHIULJHUDWRU
Set a higher temperature.
Vegetables and other products that are easily frozen have been
placed on a ”too cold” shelf. See the chapter ”Temperature
inside the refrigerator”.
7KHUH LV ZDWHU RQ WKH FRROLQJ SODWH LQVLGH
WKH UHIULJHUDWRU
This is normal. During automatic defrosting, frost thaws on the
cooling plate.
:DWHU LV UXQQLQJ LQVLGH WKH UHIULJHUDWRU
Clean the water drain and drain hole inside the refrigerator
using e.g. cotton swabs or a bottle cleaner brush.
Some food products could have been placed causing the water
from running into the drain.
:DWHU FRPHV RXW RQ WKH IORRU
Place the drain hose at the back of the cabinet above the drain
bowl. See the chapter ”Before using the cabinet the first time”.
7KH FRPSUHVVRU RSHUDWHV FRQWLQXRXVO\
Set a higher temperature.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
7KH FDELQHW GRHV QRW RSHUDWH DW DOO
&RROLQJ RU LQWHULRU OLJKW GRHV QRW
RSHUDWH 1R LQGLFDWRU ODPSV OLJKW
The power plug is not properly connected.
The fuse has blown.
The cabinet is not switched on.
Power does not reach the cabinet. (Try connecting another
electrical device to the power outlet.)
6RXQG OHYHO LQ FDELQHW LV WRR KLJK
The refrigerating system will always produce some sounds. A
pulsing sound is heard when coolant is pumped inside the
cooling pipes. A ticking sound from the thermostat can be
heard when the compressor switches on and off. The sound
level varies depending on the operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the cabinet not touch each
other. Carefully bend them if they do.
If the cushion spacers (between the cabinet wall and pipes)
come loose, put them back in place again.
Carefully follow the instructions in the chapter ”Installing the
cabinet”.
*XDUDQWHH &RQGLWLRQV
See Guarantee Conditions on the Registration Card.