background image

8

CHANGE OF BULB:

Stop the power supply. Unscrew the bulb glass protector.  Unscrew the bulb and
replace it with one of the same type E14, 220V, 15W, 300ºC. Fix the protector in
place.

GREASING OF TAPS:

It can happen sometimes that a tap turns with difficulty or even block. In such
cases the tap interior must be cleaned and greased.

Important: 

This operation must be done only by the maintenance service

technician of your distributor.

REPLACEMENT OF THE RUBBER HOSE

(if used for connecting)

Check the limit date and ask the technician to change it by another one

.

9

IMPORTANT !

  Any installation work must be undertaken according to the manufacturers

instruction and only by an authorised installer.

 

  This appliance has been designed for cooking edible foodstuffs only and must

not been used for any other purposes (for instance heating ).

 

  All gas appliances require adequate ventilation. Failure to provide this could

result in a lack of oxygen. Prolonged and intensive use of the cooker might
request a supplementary aerating e.g. increasing the power of mechanical
ventilation, if there is one.

 

  When using the oven or the grill the parts become hot. Children should be

supervised at all times and should not be allowed to touch the hot surfaces or
be in the vicinity.

Summary of Contents for ZC 550 ML









Reviews: