Zanussi ZBHC8, User Manual And Installation Instruction

Page: 11 / 16

-10-
6. Dry Hot Function :
Start: press “Dry ” button to start with a “Lo ” mode for operation and indication light gets
on. You can choose “Hi ” or “Lo ” air volume by continuously press “SPEED” button, Press
"Turbo " button, enter the strong working state (running noise of the whole will be a corresponding
increase), after entering the HI icon, LO lit up at the same time, again according to the
"Turbo " key to exit a strong state, the next will start according to the user's habits, automatic
memory the previous working condition.
Timer: the default time is 4 hours. By pressing “Time-up-down” button to select time duration.
The time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED
display. The time selection will be recorded in memory when it is off, and will resume in your next
usage.
Under the mode, the inter-change of air volume between “Hi ” and “Lo ” will not affect the time
counting.
Stop: press the "ON/OFF " button or pre-set time runs over, “Dry ” indication light gets off,
and the time display will disappear, and the machine stops automatically.
When the heater stops running, the fan will continuously run for around 35 seconds to cool down
the heater.
7. CIR Function :
Start: press “CIR ” button to start with a “Hi ”mode for operation and indication light gets on.
You can choose “Hi ” or “Lo ” air volume by continuously press ”SPEED” button, Press "Turbo "
button, enter the strong working state (running noise of the whole will be a corresponding increase),
after entering the HI icon, LO lit up at the same time, again according to the "Turbo " key
to exit a strong state, the next will start according to the user's habits, automatic memory the previous
working condition.
Timer: the default time is 2 hours. By pressing “Time-up-down” button to select time duration.
The time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED
display. The time selection will be recorded in memory when it is off, and will resume in your next
usage.
Under the mode, the inter-change of air volume between “Hi ” and “Lo ” will not affect the
time counting.
Stop: press the "ON/OFF " button or pre-set time runs over “CIR ” indication light gets off,
and the time display will disappear, and the machine stops automatically.
5. Heat Function :
Start: press “Heat ” button to start with a “Lo ” mode for operation and indication light gets
on. You can choose “Hi ” or “Lo ” air volume by continuously press ”SPEED” button, Press
"Turbo " button, enter the strong working state (running noise of the whole will be a corresponding
increase), after entering the HI icon, LO lit up at the same time, again according to the
"Turbo " key to exit a strong state, the next will start according to the user's habits, automatic
memory the previous working condition.
Timer: the default time is 2 hours. By pressing “Time-up-down” button to select time duration.
The time can be set form 1 hour to 24 hours. The remaining time will be showed on the LED
display. The time selection will be recorded in memory when it is off, and will resume in your next
usage.
Under the mode, the inter-change of air volume between “Hi ” and “Lo ” will not affect the
time counting.
Stop: press the "ON/OFF " button or pre-set time runs over, “Heat ” indication light gets off,
and the time display will disappear, and the machine stops automatically.
When the heater stops running, the fan will continuously run for around 35 seconds to cool down
the heater.