18
Installation
The hob must be installed
according to the instructions
supplied.
The hob must be installed by
qualified personnel
qualified personnel
qualified personnel
qualified personnel
qualified personnel to the
relevant British Standards.
Please, ensure that, once the hob
is installed, it is easily accessible
for the engineer in the event of a
breakdown.
When the hob is first installed
Once the hob has been installed,
it is important to remove any
protective materials, which were
put on in the factory.
The manufacturer will not accept
liability, should the above
instructions or any of the other
safety instructions incorporated in
this book be ignored.
These cooktops are designed for
fitting on modular kitchen cabinets
having a depth of between 550 and 600
mm and suitable characteristics.
Fitting the Hob into the
worktop
Carry out the building in of the hob
as follows:
• place the seals supplied with the
hob on the front edge of the cut
out. Then, place them at 11 mm
from the side edges and at 10 mm
from the rear edge, as shown in
the diagram, taking care that the
seals meet without overlapping.
• Place the hob in the cut out,
taking care that it is centred.
Fig. 8
Summary of Contents for ZBE 603
Page 1: ...ZBE 603 Electric hob Instruction booklet ...
Page 17: ...17 Wiring Diagram ...
Page 23: ...23 ...
Page 24: ...35698 6101 09 07 R 0 www zanussi electrolux co uk ...