2.
Remove the
lamp cover
(refer to the il-
lustration).
3.
Replace the
used lamp
with a new
lamp of the
same power
and specifically designed for household
appliances. (the maximum power is shown
on the lamp cover).
4.
Connect the mains plug to the mains sock-
et.
5.
Open the door. Make sure that the lamp
comes on.
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "In-
stallation".
3.
If necessary, replace the defective door
gaskets. Contact the Service Center.
Technical data
Dimension of the recess
Height
1900 mm
Width
860 mm
Depth
550 mm
Rising Time
14 h
Voltage
230-240 V
Frequency
50 Hz
The technical information are situated in the rat-
ing plate on the internal left side of the appli-
ance and in the energy label.
Installation
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the rating plate corre-
spond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact for
this purpose. If the domestic power supply
socket is not earthed, connect the appliance to
a separate earth in compliance with current
regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Direc-
tives.
11
www.zanussi.com
Summary of Contents for ZBB47460DA
Page 74: ...74 www zanussi com ...
Page 90: ...90 www zanussi com ...
Page 91: ...91 www zanussi com ...
