3. Check that the fluff filter is clean and that the
coarse filter is lowered and has snapped into
place.
4. Check that the water tank is empty and pushed
correctly into place.
5. Put the load for drying into the machine. Make
sure that it is right inside the drum. Do not mix
synthetics with natural materials.
6. Close the door.
7. According to the type of load, turn the timer
knob to a suitable drying time on either the
Cotton or the Synthetics time scale.
8. Press the start button inwards.
CAUTION! It is advisable not to open
the door during a programme as this
could cause water to leak from the
machine.
HINTS AND TIPS
PREPARING THE LAUNDRY
• Close the zippers.
• Close the fasteners of the duvet covers.
• Do not keep ties or ribbons loose (e.g. apron
ribbons). Tie them before you start a
programme.
• Remove all items from the pockets.
• If an item has the internal layer made of cotton,
turn it inside out. Make sure that the cotton layer
is always external
• We recommend that you set the correct
programme applicable for the type of fabrics
that are in the appliance.
• Do not put fabrics with strong colours together
with fabrics with light colours. Strong colours
can bleed.
• Use an applicable programme for cotton jersey
and knitwear to prevent the items to shrink.
• Make sure that the laundry weight is not more
than the maximum weight that is in the
programme table.
• Dry only the laundry that is applicable for tumble
dryer. Refer to the fabric label on the items.
Fabric label
Description
Laundry that is applicable for tumble dryer.
Laundry that is applicable for tumble dryer. Set the programme with standard
temperature.
Laundry that is applicable for tumble dryer. Set the programme with low tempera-
ture.
Laundry that is not applicable for tumble dryer.
CARE AND CLEANING
CLEANING THE FILTER
For your tumble dryer to function correctly, the
filters need to be cleaned before or after every load
dried.
WARNING! Never start the dryer
unless the fluff filter is clean and
correctly in place, or if the fluff filter is
damaged (this could cause
overheating).
9
