TROUBLESHOOTING
Before calling out an engineer, please check
through the details below because some faults can
be rectified easily without the need to call out an
engineer. If service is called to resolve a problem
listed below or to repair a fault caused by incorrect
installation or mis-use, there is a risk that you will
be responsible for the cost.
Fault
Check
The dryer will not start.
Is the door closed properly?
Is the door closed properly?
Has the fuse blown?
Have you set the timer knob properly?
Is the water tank full?
Is the Start button pressed in?
The load is not drying properly,or is taking too
long to dry.
Was the time set not long enough?
Is the load too large?
Cotton max. 4 kg
Synthetics max. 1,5 kg
Is the fluff filter clogged?
Is the condenser clogged?
Was the load not spun enough in the washing
machine?
Have you been using the ”Synthetics” setting on
the timer (lower drying temperature)? Provided
the load is suitable for the higher temperature,
use a “Cotton” setting.
Is the temperature in the room too high? Must
not 35° C.
The area around the dryer is hot.
Is the room too small? (Improve the room ventila-
tion, open a door or window, or choose another
site for the dryer).
CAUTION! Never attempt to repair the
tumble dryer yourself. Repairs carried
out by unauthorised or inexperienced
persons can cause injury or serious
malfunctioning.
12
