16
Electrical connections
Before making the connection make sure that the energy
power available in the user's house is sufficient for the
normal supply of this appliance (see rating plate), the unit
is correctly connected to earth through a suitable plug
and according to the installation country laws.
This appliance is supplied with connection cable provided
with plug. The plug must be connected to a proper
socket.
The socket or the omnipolar switch used for the
connection must be easily reached with the installed
appliance. The applinace is supplied with a plug. The
plug has to be connected to an adequate socket.
If you wish to directly connect to the mains, you have to
interpose an omnipolar switch with a minimum opening
between contacts of 3mm, between the unit and the
mains, complying with the existing regulations. The
yellow/green earth wire must not be interrupted by the
switch. The brown live wire (originating from the clamp of
the cooker junction box) must always be connected to
the phase of the mains supply. In any case, the supply
cord must be positioned in such a way as it doesn't
reach in any point a temperature higher than 90°C.
Replacement of the supply cable
Should the supply cord need to be replaced, choose only
cable types from the following:H07 RN-F, H05 RN-F, H05
RR-F, H05 VV-F, H05 V2V2-F (T90), H05 BB-F (section:
3 x 1 mm
2
). It is necessary that the yellow/green earth
wire is about 2cm longer than the live and neutral ones
(Fig. 17).
After the connection, test the heating elements for about
3 minutes to ensure that they are working correctly.
The manufacturer refuses any responsability in
cases where normal safety measures are not
observed.
Fig. 17
Earthwire (yellow - green)
Neutral wire
Phase
FO 0073
