13
Fig. 18
FO 0063
Fig. 19-b
FO 0064
Instructions for the installer
Installation
It is important that all operations are carried out by
qualified personnel, in the normal manner.
The specific instructions are describred in the chapter
on installation.
Before using the unit, take off the special protective layer
which protects the stainless steel and anodyne tin parts.
The following instructions are meant for a qualified
installer, in order that the operations of installation,
regulation, and service are executed according to the
existing regulations.
Whenever changes are mode involving the disconnection
of the machine it is necessary to proceed with maximum
caution.
THE MANUFACTURING COMPANY DECLINES
ANY RESPONSABILITY FOR POSSIBLE
DAMAGES
RESULTING
FROM
AN
INSTALLATION WHICH DOESN'T COMPLY
WITH THE RULES IN FORCE
Installation Environment
Warning - This unit can be installed and can work only
in constantly ventilated rooms, according to rules in
force. In order to make the gas unit work properly, it is
necessary that air sufficient to gas combustion can
naturally flow in the room. (The installer must follow the
rules in force).
Positioning
This appliance belongs to the class "X". It has been
designed to be placed close to furniture units not exceeding
the height of the working level (EN 60 335-2-6).
Levelling
The appliance is provided with adjustable small feet
placed in the back and front corners od the base.
By adjusting the small feet (fig. 18) it is possible to
change the height of the appliance so as to ensure a
better levelling with other surfaces and a uniform
distribution of the liquids contained in pans or pots.
Balancing the lid
All the cooker lids can be disassembled, to allow better
cleaning.
- Enamelled lids can be disassembled as shown in fig.
19 - a).
- The models provided with crystal lids are equipped
with specially balanced springs, inserted in the hinges
at the back of the appliance, to allow the lid to be
closed smoothly and easily. You can use a screwdriver
to adjust the closure of the lid. The necessary force
for opening/closing the lid can be increased by turning
the adjusting screw 2 or 3 times as shown in Fig. 19
-b.
Warning! The crystal lid can splinter when
overheated. Always ensure all the burners
are off before closing it.
Fig. 19-a
