Zanussi Electrolux ZEUC 2120, Instruction Booklet

Page: 3 / 16

3
CONTENTS
Instructions for the User
Important Safety Information
2
Operation
4
Before use 4
Control panel 4
Start your appliance 4
Temperature control 4
Freezing fresh food 4
Frozen food storage 5
Thawing 5
Making ice cubes 5
Normal operating sounds 6
Hints and tips
6
Maintenance and Cleaning
7
Internal cleaning 7
External cleaning 7
When the appliance is not in use 7
Defrosting 7
Something Not Working
8
Service and Spare Parts
9
Customer Care Department
9
Guarantee Conditions
10
Instructions for the
Installer
Technical Specification
11
Installation
12
Positioning 12
Rear Spacers 12
Electrical Connection
13
Door Reversal
14
Disposal of old Appliances
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
14
Door reversal
1. Disconnect from the electricity supply.
2. Remove all loose items, including food, store food
in a cool place.
3. Gently lay the fridge/freezer on its back with the
top held away from the floor by 5-8 cm (2-3
inches) of packing;
4. Remove the feet (3)
5. Remove bottom hinge (1).
6. Slide out the door from pin (G), unscrew the
latter and then screw it down into the hinge hole
provided on the opposite side, after having
removed the small plugs which should then be
fitted on the opposite side.
7. Refit the door and bottom hinge (1) on the
opposite side.
8. Refit the feet (3) on the opposite side.
9. Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch.
Cover the holes left open with the plugs
contained in the documentation pack.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
D715 PIED/M
1
2
3
G
PR228