60
4.2 Setting the unit at work
Press push-button 1 to turn on the driver's cabin control. The mask shown in
fig. 2
will appear after a few seconds.
This mask shows:
• TA1: Cold room temperature
• SP1: operating set point
• current date and time,
• type of diesel operation, either slow (LOW) or fast (HIGH).
fig. 2
CAUTION
Only use push-button 1 to turn off (or on) the electronic control unit if the refrig-
eration unit is not used. Always use the
button only to turn the refrigerator on
and off
(fig. 2)
.
4.3 Setting the operating set point
Press key
. The mask below will be displayed.
Press key
. The cursor will start blinking under the present SP1 set point
value.
Press the UP/DOWN key to change such value.
Press key
to store the defined value.
fig. 3
Summary of Contents for DFZ
Page 2: ......
Page 4: ...ENGLISH GB GB...
