___________________________________________________________________7. CLEANING
____________________________________________________________________________
24
CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC ELECTROMECHANICAL VERSION
7.3 Cleaning the oven's cooking chamber
To clean the aluminum coated sheet steel cooking chamber, use a soft
moistened sponge and if needs be a weak non abrasive detergent, making
sure not to let any cleaning liquids drip onto the ceramic refractory material.
If there is a consistent amount of fat deposited on the surfaces remove them
first using a spatula.
Do not use abrasive or corrosive detergents because these will cause
the stainless steel to become opaque and will, quite quickly, remove the
protective layer of aluminum coated sheet steel, at which point it will start to
rust.
Do not direct jets of water onto the equipment for clearing as these can
penetrate through to and damage the electrical system with the consequent
risk of electrocution and the equipment starting up unexpectedly.
7.4 Cleaning external surfaces
To clean the external surfaces made from either stainless steel or painted
sheet metal as well as the control panel, use a soft moistened sponge and if
needs be a weak non abrasive detergent.
Do not use abrasive or corrosive detergents because these will cause
the stainless steel to become opaque and eventually remove the painted
surface of sheet metal parts at which point they will start to rust.
Do not direct jets of water onto the equipment for clearing as these can
penetrate through to and damage the electrical system with the consequent
risk of electrocution and the equipment starting up unexpectedly.
