____________________________________________________2. HOW TO USE THIS MANUAL
____________________________________________________________________________
6
CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC ELECTROMECHANICAL VERSION
2. HOW TO USE THIS MANUAL
The paragraphs with this symbol contain essential safety
information. They must all be read both by the installers and by the final
user and any of his staff who may use the equipment. The manufacturer
shall not be held liable for any damage which may occur as a result of
failure to observe the norms indicated in these paragraphs.
The paragraphs with this symbol contain important information
which can be used to avoid damage being caused to the equipment. It
is the user’s own interest also to read these paragraphs carefully.
This symbol applied to various points on the oven serves to warn
the user of danger: "ATTENTION: HOT SURFACES!".
This symbol, applied to various points on the oven, serves to warn
the user of the presence of a non-insulated "high voltage hazard" inside
the oven's casing, there being enough power to constitute a fire risk or
to electrocute a person.
This manual should be kept near to the equipment itself so it can be
quickly and easily consulted. The manual must travel with the equipment if it
is moved to another owner as the latter may not be considered complete or
safe without it.
Please take note of the code and revision numbers which are behind the
back cover. If this copy should get mislaid or destroyed you can order
another one by referring to the codes.
This manual is divided up into a number of chapters. All of these should
be read by the installers, maintenance staff and the final user, both in
relation to its
safe use
and in order to obtain the best result from this
product.
Despite this we also give below some useful indications on how to look things
up quickly in the various chapters.
Chapter 3 describes the field of use of the equipment and provides the
characteristics and figures which may be needed when choosing, installing
and using it. It should be used as a reference to check the use which is
intended to be made of the equipment corresponds to that for which it was
designed, and whenever it is necessary to know an exact size value relating
to the equipment.
