63
3
To set the timer more quickly, leave your finger on the
+
or
-
sensor
field until the required time is reached.
If the
-
sensor field is operated first, the time setting will begin at
99 minutes; if the
+
sensor field is operated first, the time setting will
begin at 1 minute.
Displaying the remaining cooking time
If you select a cooking zone which is in timer mode, the cooking time
still remaining appears in the timer display window.
Using the timer to measure short periods of time (“egg
timer”)
3
The timer function can also be used to measure short times without
the automatic switch-off function, provided the timer is not already
being used for 1 or more cooking zones. No cooking zone may be se-
lected in this case. The cooking zone sensor field with the decimal
point in the display must therefore be touched again so that the deci-
mal point goes out.
Set the time as described above.
Ending the timer function prematurely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer simultaneously
1.
Select the desired cooking zone using the cooking zone buttons.
2.
Touch the
+
and
-
buttons simultaneously:
The cooking zone and
timer
will switch off.
Switching off the timer - leaving the cooking zone active
1.
Select the desired cooking zone using the cooking zone buttons.
2.
Touch the “Timer” button again
3.
Touch the
+
and
-
buttons simultaneously:
– Only the
timer
will switch off.
– The cooking zone will stay on.
Summary of Contents for ZKM 3190X
Page 37: ...75...
Page 38: ...76 Rating Plate...
Page 40: ...156 Montage Assembly Montaggio Monta...
Page 41: ...157 Ausbau Demontage D montage Removal Smontaggio min 5 mm min 25 mm...
