58
Residual Heat Indicator
When an individual cooking zone or the entire hob is switched off, any
residual heat is shown with an
h
(for “Hot”) in the digital display for
the appropriate cooking zones.
Even after the cooking zone has been switched off, the residual heat
indicator only goes out when the cooking zone is cold.
2
You can use the residual heat for melting and keeping food warm.
1
Important!
As long as the residual heat indicator is illuminated, there
is a risk of burns.
1
Important!
If the power supply is interrupted the
h
symbol will also
go out and information about residual heat will no longer be available.
However, it is still possible to burn yourself. This can be avoided by
being particularly attentive.
Cooking with the Automatic Warm up Function
All four of the hob's cooking zones can be controlled in nine stages
and have an automatic warm up function:
–
!
, lowest heat setting
–
)
, highest heat setting
–
a
, automatic warm up function
When you select the required heat setting using the
+
sensor field,
the cooking zone will work for a specific time on full power and then
switch automatically to the set heat setting.
The duration of the automatic warm up function depends on the heat
setting selected.
Summary of Contents for ZKM 3190X
Page 37: ...75...
Page 38: ...76 Rating Plate...
Page 40: ...156 Montage Assembly Montaggio Monta...
Page 41: ...157 Ausbau Demontage D montage Removal Smontaggio min 5 mm min 25 mm...
