51
Operating the Hob
3
When a cooking zone is switched on, it may hum briefly. This is a
characteristic of all glass ceramic cooking zones and does not impair
either the function or the life of the appliance.
TOUCH CONTROL Sensor Field
To operate the TOUCH CONTROL sensor field place your finger from
above flat onto the required field until the appropriate displays come
on or go out or the required function is carried out.
Switching On the Appliance
The entire appliance is switched on using the “On/Off”
n
sensor
field.
Touch the “On/Off” sensor field for approx. 2 seconds.
The digital displays will show
j
and the decimal point will flash.
3
Once the “On/Off” sensor field has been operated to switch on the ap-
pliance, one of the cooking zones must be selected within approx.
10 seconds using the cooking zone selection buttons. Otherwise the
appliance switches off again for safety reasons.
Switching Off the Appliance
To switch off the appliance completely activate the “On/Off”
n
sensor field.
Summary of Contents for ZKM 3190X
Page 37: ...75...
Page 38: ...76 Rating Plate...
Page 40: ...156 Montage Assembly Montaggio Monta...
Page 41: ...157 Ausbau Demontage D montage Removal Smontaggio min 5 mm min 25 mm...
