ZANKER KOB57602, User Manual

Page: 8 / 52

Buttons
Button Function Description
MINUS To set the time.
CLOCK To set a clock function.
PLUS To set the time.
Heat-up indicator
When you activate an oven function, the bars in the
display
come on one by one. The bars show that the
oven temperature increases or decreases.
Clock functions
Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day. Refer to "Setting the time".
MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min). This function has
no effect on the operation of the appliance. You can set the MINUTE
MINDER at any time, also if the appliance is off.
DURATION To set how long the appliance operates. Use only when an oven function
is set.
END To set when the appliance must deactivate. Use only when an oven
function is set. You can use Duration and End at the same time (time
delay), if the appliance is to be activate and deactivate automatically lat-
er.
Press again and again to switch
between the clock functions.
To confirm the settings of the clock
functions, press
or wait 5 seconds for
an automatic confirmation.
Setting the DURATION or END
1. Press
again and again until the display shows
or .
or flashes in the display.
2. Press or to the set the values and press
to confirm.
For Duration first you set the minutes and then the
hours, for End first you set the hours and then the
minutes.
An acoustic signal sounds for 2 minutes after the time
ends.
or symbol and time setting flash in the
display. The oven stops.
3. Turn the knob for the oven functions to the off
position.
4. Press any button or open the oven door to stop the
acoustic signal.
If you press when you set the hours
for DURATION , the appliance goes
to setting of the END function.
8