Zane zTrack One, Operating Manual

Page: 14 / 17

www.zane.hu
14
Status Led
There is a RGB LED indicator on the zTrack One to inform you about specific events during operation.
The LED indicates various events during operation with colours and blinking.
Activity LED colour Led action
System initialization Red 1 Blink
Send LoRa uplink Blue 1 Blink
Receive LoRa downlink Blue 3 Blink
System enters Sleep mode Red 2 Blink
Start USB configuration White 4 Blink
GPS coordinate search failed Purple 2 Blink
Motion detection activated Yellow 2 Blink
Motion detection deactivated Yellow 2 Blink
Motion detection active Yellow 1 Blink
Motion detection detected Yellow 1 Blink
The button is pressed (GPS on) Green 1 Blink
The button is pressed (GPS off) Light Blue 1 Blink
Device charging Red Continuous lighting
Device charged Green Blinking
Motion sensor
Motion detection can be activated and deactivated by the length of the button press (approx. 5sec).
On reaching a time of a specific function, the device flashes in a colour accordingly. See the
Status
LED section.
On the activating the motion sensing, the device waits 30 seconds before activating the detection.
This is applied to give some time for the user to settle the device.