www.zane.hu
3
Battery and Charging
The built-in LiPo battery can power the device for around 2 weeks. Battery lifetime highly depends
on the device configuration.
The device sends a low battery notification, see the
The battery can be charged with USB charger. Charging takes approx. 2hour and the red LED is
constantly lit. When the battery is fully charged the green LED flashes.
During charging, all activities other than the configuration are turned off.
Commissioning
Requirements
•
USB type A cable with micro USB, USB charger.
•
zTrack Configuration Tool software
Download the zTrack Configuration Tool configuration tool from
https://ztrackmap.com/support/
Configuration tool is available for Win10.
zTrack Configuration Tool is a free software interface for configuring zTrack devices.
It provides a simple environment for reading and writing device settings and performing
firmware upgrade. The tool offers several features to interact with the device; in addition to
firmware upgrade, you can adjust device settings, LoRaWAN related parameters, switch
between bootloader/application, and reset the device.
zTrack tool to configurate the device
First, start zTrack Configuration Tool, second connect zTrack One
to the computer. Don’t touch the
link for firmware. If you confirm to change firmware, zTrack One changes to boot mode, and if
there's still no acces to go back to configuration mode.
Summary of Contents for zTrack One
Page 16: ...www zane hu 16...
