Zander Aachen ZX20T, Operating Manual

Page: 10 / 44

H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Phone +49 241 9105010
Fax +49 241 91050138 • info@zander-aachen.de • www.zander-aachen.de
10
Operating Manual ZX20T/TP/TC
4. Assembly
The ZX20T, ZX20TP and ZX20TC devices are specially designed so they can be
installed easily.
Please note:
 The device must be installed in a switch cabinet or a suitable housing with a
minimum degree of protection of IP54.
 Mount on a mounting rail 35mm in conformance with EN 60715 (profile rail).

Maintain a mounting distance of minimum 5 mm from the adjacent devices, which
generate heat.

Ensure that there is sufficient heat dissipation in the switch cabinet.
 Keep enough place for the wiring.
 Keep the ZX20T, ZX20TP or ZX20TC away from devices or components, which
carry high voltage or cause strong electrical interference.
4.1 Assembly on the support rail
Place the device straight on the support rail (see fig. 3). Then press the device with
the ball of the thumb onto the support rail (see fig. 4) until both of the orange slide
locks are latched into place (above and below).
Fig. 3: Placing the device on the support rail Fig. 4: Pressing the device onto the support
rail