2
FEATURES
●
12 Volt or 24 Volt system compatible, auto-detecting.
●
Advanced MCU-controlled pulse width modulated (PWM)
technology for high efficiency operation.
●
Functions with Gel, AGM, Conventional lead-acid (WET) or
LiFePO
4
(LFP) Batteries, user selected via DIP switch.
●
Built-in regulator to prevents battery from being overcharged or
undercharged. Overcharging occurs when the charge voltage is
unregulated. This can result in premature battery failure.
●
The unit provides an automatic equalization feature for a deeply
drained conventional lead-acid battery.
●
Can be connected to the battery permanently to keep the
battery fully charged by using a process called “floating”. This
means the controller will stop charging when the battery is full
and will automatically start charging the battery as required. This
process will also reduce water loss and help prevent the battery
from ‘drying out’.
●
Protects the battery from discharge at night. Under low light or
no light conditions the solar panel voltage could be less than the
battery voltage. The unit contains a special circuit which
prevents current flowing back from the battery to the solar
panel.
●
Colored LED’s indicate charging status, battery condition and
system fault
●
Multi-charging protections against reverse polarity, short circuit,
over temperature, over voltage, etc.
●
Conformal-coating circuit boards and plated terminals protect
from hostile environments.
●
Waterproof with IP67 rating.
For use with 12V or 24V solar panels up to 270 Watts
