Zamel RZB-05, Manual

Page: 10 / 40

COOPERATION AND OPERATING RANGE
* 1-channel transmitters do not cooperate with roller blind controllers.
CAUTION: The given range concerns open area - an ideal condition without any natural or
artificial obstacles. If there are some obstacles between a transmitter and a receiver, it is
advisable to decrease the range according to: wood and plaster: from 5 to 20 %, bricks: from
10 to 40 %, reinforced concrete: from 40 to 80 %, metal: from 90 to 100%, glass: from 10 to
20 %, Over- and underground medium and high electrical power lines, radio and television
transmitters, GSM transmitters set close to a device system have also a negative influence
on the range.
ROP-01 ROP-02 ROB-01 SRP-02 SRP-03 RWG-01 ROM-01 ROM-10 RDP-01 RTN-01
RNK-02 180 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 180 m 250 m
RNK-04 180 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 180 m 250 m
P-256/8 230 m 250 m 250 m 250 m 250 m 300 m 300 m 300 m 230 m 300 m
P-257/2 (4) 180 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 180 m 250 m
RNM-10 230 m 250 m 250 m 250 m 250 m 300 m 300 m 300 m 230 m 300 m
RNP-01 160 m 180 m 180 m 180 m 180 m 200 m 200 m 200 m 160 m 200 m
RNP-02 160 m 180 m 180 m 180 m 180 m 200 m 200 m 200 m 160 m 200 m
RNL-01 160 m 180 m 180 m * * 200 m 200 m 200 m 160 m 200 m
RTN-01 200 m 200 m 200 m 200 m 200 m 250 m 250 m 250 m 200 m 250 m
RCR-01 160 m 180 m 180 m * * 200 m 200 m 200 m 160 m 200 m
RXM-01 230 m 250 m 250 m 250 m 250 m 300 m 300 m 300 m 230 m 300 m
RADIO TRANSMITTERS DELETION
1. Press PROG push-button of ROP-01 device for a longer time.
2. After 5 seconds LED red diode switches on (signal pulsates) and then it switches off.
3. Release the push-button in ROP-01 - MEMORY IS DELETED.
TIME PROGRAMMING
1. Press PROG push-button of ROP-01 device for a longer time till LED red diode switches on
(constant signal). Next release PROG push-button. Wait (for about 5 seconds) till LED red
diode switches on (first signal pulsates, next the signal is constant).
2. Press PROG push-button of ROP-01 device and then release it. LED red diode switches off
and then switches on (signal pulsates). Every LED diode pulse equals 1 second.
3. After the adjusted time is finished (the number of LED red diode flashes) press PROG push-
button and then release it - TIME IS ADDED.
Maximum time is 18 hours.