PROGRAMMES ASSIGNING
PROGRAMME ADJUSTMENT
hEATING CURVE VALUES ADJUSTMENT
SENSOR ADAPTATION ADJUSTMENT
TEMPERATURE ADJUSTMENT
- assigning programme number to the particular day of the week, press OK to enter;
Use cursors
to choose the day of the week to edit, and press OK to confirm;
Use cursors
to choose the programme number to be assigned to a particular day of the
week; press OK to enter days of the week window
.
- programmes review and adjustment, press OK to enter;
Use cursors
to choose the required programme number to edit, press OK to confirm;
When the programme number is chosen review its contents by means of cursors
the system presents data with 15 minutes difference. Press OK to edit the
programme;
Use cursors
to choose mode (temperature) that starts at 0:00, press OK to confirm;
When the mode is chosen press cursors
to adjust the proper time of temperature operation, press OK to confirm; if the chosen mode (temperature) must
operate till the end of the whole programme press the , push button. It fills the whole programme memory with the previously chosen programme;
If time is confirmed by OK command, use cursors
to choose the next mode to operate before the time previously adjusted (in certain point ); press OK to
confirm;
Use cursors
to choose time for the adjusted temperature to operate - press the push button to save the adjustments and to go to programme review.
Prog 0
Not editable programme:
round-the-clock anti frozen temperature
Prog 1
00:00 - 06:00 - economical temperature
06:00 - 23:00 - comfort temperature
23:00 - 00:00 - economical temperature
Prog 2
00:00 - 06:00 - economical temperature
06:00 - 08:00 - comfort temperature
08:00 - 16:00 - output temperature
16:00 - 23:00 - comfort temperature
23:00 - 00:00 - economical temperature
Prog 3
00:00 - 06:00 - economical temperature
06:00 - 08:00 - comfort temperature
08:00 - 10:00 - output temperature
10:00 - 12:00 - comfort temperature
12:00 - 16:00 - output temperature
16:00 - 23:00 - comfort temperature
23:00 - 00:00 - economical temperature
Prog 4
00:00 - 06:00 - comfort temperature
06:00 - 13:00 - economical temperature
13:00 - 15:00 - comfort temperature
15:00 - 22:00 - economical temperature
22:00 - 00:00 - comfort temperature
Prog 5
Round-the-clock economical temperature
Prog 6-9
Empty programmes
- ready to be edited by a user - default
adjusted comfort temperature
t
[
h
]
t
[
h
]
t
[
h
]
t
[
h
]
t
[
h
]
t
[
h
]
t
[
h
]
temperature
There is an escape possibility from
every submenu window one level
higher in every moment of program-
ming by pressing or without
saving the adjusments.
(heating curve) - operation adjustment as a room temperature regulator
or temperature regulator with reference to outer temperature (weather
regulator), in accordance with pre-set heating curve values or individual curve
points adjustments; press OK to enter;
- room regulator operation adjustment;
- weather regulator operation adjustment in accordance with pre-set
heating curve types;
- weather regulator operation adjustment in accordance with individual
values adjustments of heating curve points;
Window : press OK to change heating curve type; use cursors
to adjust
type - adjustment range: from 0,2 to 1,8 ; press OK to confirm;
Window : press OK to adjust individually temperature values for four heat
-
ing curve points; use cursors
to adjust the first value of the first
point of the heating curve
which describes the reference tempera
-
ture (e.g. outside a building in case of weather operation mode); press
OK to edit the second value of the first point of the heating curve
;
use cursors to adjust the expected temperature values (e.g. central heating
boiler temperature) which is obtained in case the reference temperature occurs
; press OK to edit the first value (reference temperature) of the second point of
the heating curve
; use cursors to adjust the temperature for the second
point; press OK to edit the expected temperature of the second point of the curve
; repeat the same steps as for the first point; following OK commands confirm
adjustments for the rest curve points till the second value of the fourth point
;
use cursors
to choose the required value and press OK to save adjust
-
ments and to go to a higher level.
Window : press OK to adjust the regulator as a typical room regulator.
- sensor adaptation adjustment - when the user notices that the temperature measured by sensors
is different from the real one, measure temperature correction can be done; press OK to edit;
- press OK to change the adjusted value; use cursors
to choose the required temperature
correction from the range of - 4,5 °C ÷ +4,5 °C; press OK to confirm.
- press OK to change the adjusted value; use cursors
to choose the required temperature
correction from the range of - 4,5 °C ÷ +4,5 °C; press OK to confirm.
There is an escape possibility from every submenu window one level higher in every moment of program-
ming by pressing or without saving the adjusments.
Individual exemplary heating curve
expected
temperature
(of a heater) [
o
C]
T2
reference temperature (outer) [
o
C] T1
Heating curves for inner temperature of 20
o
C
- temperature adjustment; press OK to
review and to edit; use cursors
to choose
temperature:
Window : Antifreeze temperature - can not be
changed by a user;
Window : Comfort temperature (day) - press
OK to change the adjusted parameters; use cur
-
sors
to choose the required temperature ;
press OK to confirm.
Window : Economical temperature (night) -
press OK to change the adjusted parameters;
use cursors
to choose the required tempera
-
ture ; press OK to confirm.
Window : Output temperature - press OK to
change the adjusted parameters; use cursors
to choose the required temperature ; press OK to confirm.
Window : Safety temperature - press OK to change the adjusted parameters; use cursors
to choose the required temperature;
- adjustment - stands for
95 °C value ; press OK to confirm.
CAUTION:
If the regulator is in the weather mode, the adjusted temperature values constitute a point of curve shift. The basic heating curve is based on 20 °C
comfort temperature. If the comfort temperature is adjusted to 25 °C the curve shifts to 5 °C up, however it goes 5 °C down if the comfort temperature is adjusted
to 15 °C. The antifreeze temperature switches off the regulator and switches on protection mode against freezing.
heater
temperature
T2 [
o
C]
expected
temperature
(of a room)
[
o
C]
outer temperature T1 [
o
C]
