12
Click “Save” after you have finished entering all above mentioned
settings.
“DATA SAVED”
message is displayed to signal correct saving of settings. At that moment, restart the module
again by pressing the red CONFIG push-button (available in the slot) or just disconnect and
connect the device.
The module establishes a Wi-Fi connection. It is signalled by a flashing LED (2 flashes/1
second). In case of a positive connection, the device establishes a connection with SUPLA
server. It is signalled by a flashing LED (1 flash/1 second).
The LED remains on, if the
connection with the server has been successful
(or it switches off according to the
configuration setting: the LED switches off after successful connection).
After a successful server connection, the module is ready to operate and you can start
configuration of the application on a smartphone or a tablet.
