2. INSTALLATION
3. CONNECTORS
4. FIRST START-UP AND CONFIGURATION OF THE NETWORK CONNECTION
The device is supplied as standard with an assembled tubular frame. A bracket for direct surface mounting is also included in the kit.
To mount the device in the surface unscrew the frame with Allen key included in the kit and install the base intended for surface-mo-
unting in its place.
The device can operate autonomously but it is required to connect it to the computer with LAN cable for configuration and
setting purposes. After making all necessary settings it can be disconnected from the computer and it will operate indepen-
dently.
4.1. Connect the device to power supply using power unit included in the set and connect it with RJ45 LAN network cable to any com-
puter with active network card.
After the power supply is connected, the device needs up to several minutes to warm up the sensors before it can measure
the temperature of entering people.
4.2. Enter the available network connections
(Windows 10: Settings > Network and Internet > Ethernet > Change adapter options (Fig.1)).
Mounting frame
Mounting screw
Network connector RJ45
Power supply connector (12 V)
Relay output
(NO/NC dry contact)
device
Device installation on the mounting frame
Device installation on the base for surface mounting
Base for surface
mounting
Fig.1
Power supply connector (12 V)
Network connector RJ45
Relay output (NO/NC dry contact)
