PROGRAM VIEWING
PROGRAM SETTING
IMPULSE PROGRAM SETTING
PROGRAM CANCEL / RESTORE
- the impulse generating mode switch ON / OFF and impulse duration time setting; the display shows the current
mode state (
- ON,
- OFF); enter edition with OK;
With
cursors select the mode state
or
; acknowledge selection with OK; if the option
selected, the main
menu will be entered;
If selected
set with
cursors impulse duration time in seconds; acknowledge with OK;
After setting acknowledgement the impulse mode setting window is entered. In the impulse mode only programs are
available.
- de
fi
ning ON-times and OFF-times for the given week’s days for the given programs running in automatic mode
messages on busy ON and OFF programs quantities are being showed alternatively in the current window ,
(e. g.
); edition entering by pressing OK; the programs are numbered as pairs ( /
). Max programs quantity is
equal to 200 /
pairs;
With
cursors select a program at (e.g.
) for parameters editing and enter editing mode with OK;
HOUR - with
cursors select an hour, acknowledge with OK;
MINUTE - with
cursors select minutes, acknowledge with OK;
WEEK’s DAY - with
cursors select the week’s day when the given program is to be active (there are 16 week division
combinations available); acknowledge with OK - the program will be saved;
The next stored program will be displayed (e.g.
) - Press OK. to enter edition; in order to select the other pro-
gram use
cursors, to exit programming press or ;
The last program is
.
PROGRAM VIEWING - viewing settings for the switching pro-
grams ( /
) i.e. hours, minutes and the week’s days; enter
viewing with OK;
In order to scroll the programs press successively cursor
; cursor increases the program no.; cursor decreases
the program no.;
The programs are numbered in the form of ON / OFF pairs
( /
) where every program may be treated independently;
there are 400 programs (200 pairs /
).
It is possible to exit every submenu window in any moment
without saving settings by pressing the button or .
PROGRAM CANCEL / RESTORE - the option is used during program setting and viewing for program cancelling (inacti-
vation) and restoring; enter by pressing OK;
With
select the program to be cancelled / restored;
Press and hold OK for 3 seconds - if the program is active it will be cancelled (inactivated) and will not be checked during
the timer operating in the automatic mode (however it will by saved in the storage and it will be possible to restore the
program); horizontal lines will be displayed;
If the program is cancelled, it will be restored by pressing OK and its edition will be possible , pressing and holding OK
for 3 seconds will cause the program restoring without time edition possibility .
Week division combinations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
EXTERNAL INPUT SETTING
MAIN RESET
RANDOM MODE SETTING
- setting the unit mode after the IN external input triggering; enter edition by
pressing OK; with cursors
select an appropriate external input mode, where:
- the external input function is OFF;
- the manual mode with the relay continuous switch-OFF;
- the manual mode with the relay continuous switch-ON;
- the automatic mode, the relay is being switched ON / OFF according to the preset
programs;
- the random mode according to the RANDOM MODE SETTING menu settings;
Acknowledge selection with OK; after acknowledgement the external input settings win-
dow will be entered.
It is possible to exit every submenu window in any moment without saving settings
by pressing the button or .
In order to cancel the clock system (time, date, activity of given functions etc.) you
should hold buttons ( and ) simultaneously in the main menu for
3 sec
;
All the display
fi
elds will light up;
After a while, the clock will automatically set date and time.
Attention: In order to restore factory settings, you should additionally hold button OK
- setting the time range and days when the randomize function is to be ON and
de
fi
ning maximum relay ON-time and OFF-time in the random mode; enter with OK;
select the appropriate window with
cursors, where:
- de
fi
ning the time and day of the random mode beginning (active randomizing);
- de
fi
ning the time and day of the random mode ending (inactive randomizing);
- de
fi
ning maximum relay ON-time in minutes - the time will be randomized for the
range from 1 minute to
minutes;
- de
fi
ning maximum relay OFF-time in minutes - the time will be randomized for
the range from 1 minute to
minutes;
Window : press OK to enter; with
cursors set randomizing ON hour, acknowledge
with OK; with
set randomizing ON minute, acknowledge with OK; with
cur-
sors set the days when randomizing is to be ON, acknowledge with OK; window will
be open.
Window : press OK to enter; with
cursors set randomizing OFF hour, acknowledge
with OK; with
set randomizing OFF minute, acknowledge with OK; with
cur-
sors set the days when randomizing is to be OFF, acknowledge with OK; window will
be open.
Window : press OK to enter; with
cursors set maximum ON- time (in minutes),
acknowledge with OK; window will be open.
Window : press OK to enter; with
cursors set maximum OFF-time (in minutes),
acknowledge with OK; window will be open.
It is possible to exit every submenu window in any moment without saving settings
by pressing the button or .
5m
7m 3m
4m
8m 1m
2m
3m
3m
1m
2m
1m
4m
t
11 14
11 14
CONNECTION
MOUNTING
ADVANTAGES
Intelligent calendar
- the programmer is
fi
tted with a built-in calendar
which
fi
ts leap years automatically, disables entering incorrect dates,
calculates a week’s day on the basis of the current date and
fi
ts the
summer / winter time change.
General purpose external input
- the programmer is
fi
tted with an ex-
ternal input that enables the operating mode change without operating
a switchboard, e.g. by means of a remote push button.
Programmable random mode
- it is possible to set beginning and
ending time, and the day of the random mode activity. Additionally, it
is possible to program maximum ON and OFF times in dependence
of user’s needs.
Additional impulse mode
- it is possible to switch the timer into the
impulse mode which gives control units new capabilities.
DIMENSIONS
PRODUCT FAMILY
ZCM-11 Programmer belongs to ZCM
family of products.
1. Disconnect power supply by the phase
fuse, the circuit-breaker or the switch-
disconnector combined to the proper
circuit.
2. Check if there is no voltage on con-
nection cables by means of a special
measure equipment.
3. Install the ZCM-11 on the TH 35 DIN
rail in the switchboard.
4. Connect the cables with the terminals in
accordance with the installing diagram.
5. Switch on the power supply from the
mains.
WARRANTY CARD
Salesman stamp and signature, date of sale
There is 24 months guarantee on the product
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modi
fi
cations made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
INNER DIAGRAM
RELAY CAPACITY
L(+)
L(+) / N(-)
N(-)
A2
A1
IN
μ
C
KLAW.
LCD
RTC
ZAS.
Programmer type:
11 - week (1 channel)
12 - week (2 channel)
21 - year
31 - astronomical
Device type
Power supply:
ZCM-xx -
230 V AC
ZCM-xx/U - 24 ÷ 250 VAC
30 ÷ 300 V DC
