VER. 001_18.03.2010
MOUNTING, FUNCTIONING
APPLICATION
1. Disconnect the electric network by
means of an appropriate cut-off, cur
-
rent- limiting circuit-breaker or sepa
-
rator.
2. Check if there is no any voltage
between power leads by means of
an appropriate gauge.
3. Mount the MOM-02 module on TH35
rail.
4. Connect the system leads according
to the electrical diagram.
5. Connect power supply circuit.
The device is ready to work just ri
-
ght after its appropriate connecting. The
LED built in the control button lights in
case of the module power supply pre
-
sence. The button pressing causes
switching the output relay ON / OFF al
-
ternatively. The large LED indicates the
current relay state. When the LED lights,
the relay is ON (11–14 contacts closed)
and when it is OFF, the relay is OFF
(11–12 contacts closed).
CONNECTING
TIME COURSES
RELAY CAPACITY
INNER DIAGRAM
DIMENSIONS
PRODUCT FAMILY
The MOM-02 control module is a mem
-
ber of the MOM product family.
Device version:
01 - monostable
02 - bistable
Device type
Colour version:
10 - red LED
20 - green LED
30 - yellow LED
The PBM-01 bistable relays may be used for master switch-OFF the light. After the
MOM-02 switch-ON (the signalling LED lighted) the relays are OFF and the light bulbs
are disconnected from power supply. After MOM-02 successive key pressing the re
-
lays and the light are ON.
Master
switch-OFF
L
N
L
N
WARRANTY CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
