background image

EXTA FREE CONTROLLER EFC-02 MINI

 

MANUAL INSTRUCTION

ZAMEL 

Sp. z o.o.

ul. Zielona 27, 43-200 Pszczyna, Poland

Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04

www.zamel.com

, e-mail: [email protected]

plik: inst_ext_en_efc-02 | modyfi kacja: 22.05.2014

SOFTWARE UPDATE OF CONTROLLER

ACTIVE TABS IN THE PROGRAM FOR EFC-02

LIMITATIONS

Software updates in the EFC-02 is made from a PC.

In order to update the software you needs:

1. Download the current version of the software from the www.zamel.com or www.extafree.pl. 

2. Connect the controller EFC-02 into a PC’s USB port.

3. Controller will report to the system as external memory by ZAMEL UPGRADE DISC 

4. In order to update the software, remove the file *. bin directory located on the ZAMEL UPGRADE DISC  and then copy a new file. 

5. After finishing copy process you need disconnect the controller from the PC. 

6. The software is updated. 

TRANSMITTERS

Collection of all virtual transmitters used to control receivers of EXTA FREE system what was installed in your house. The appearance of transmit-

ters alludes to physical transmitters system.

HOUSE

Allows you to split the whole house system level - living room - the device. Tab allows for simple and clear management of all the devices in the 

house to associated with the receivers EXTA FREE.

SCENES

Allows you to define the specific sequence of events that you want to performing simultaneously or set delays. Scenes can be launched from the 

application or physical transmitter EXTA FREE..

TIMED OPERATION

Allows you to define the specific sequence of events that you want to perform at a specific time, day of week, month, or sequentially. Timed oper-

ations bring on automatically level of controller.

DETECTORS

Tab enables to preview status or values derived from the registered application of the radio detectors: temperature, illuminance, flooding, 

motion, etc.

CONFIGURATION

Tab allows you to enter basic settings configuration associated with users, network parameters, the remote access, language settings, etc. 

  Limitations of the tabs: TRANSMITTERS / HOUSE/SCENES / TIMED OPERATIONS / DETECTORS

The maximum number of transmitters to define the tab without limitation TRANSMITTERS

Unlimited

Maximum number of devices to define tab HOME

Unlimited

Maximum time for waiting key code

during the cloning operation press ”END”

Maximum events (codes) creating a single stage

10

Maximum number of scenes can be defined in the tab without limitation SCENE

Unlimited

Maximum number of scenes in progress

20

Maximum events (codes) creating single TIMED OPERATIONS

10

Maximum number of functions can be defined in the tab TIMED OPERATION

– globally for all users

40

Setting delay time

0 to 99 sec

Settings until you press

0 to 99 sec

Maximum number of detectors to define the tab DETECTORS

50

Maximum waiting time for sensor code during operation of adding detectors

press ”END”

TECHNICAL SPECIFICATIONS

THE DESCRIPTION

Controller EFC-02 Mini after connec-

tion with the Wi-Fi router gives you the 
opportunity to control all of the receir-
vers of EXTA FREE system from the 
level of the mobile divice. Apart from 
the function of ”virtual” transmitters 
controller EFC-02 Mini has the possi-
bility of realization SCENES, THE TIME 
FUNCTIONS and the preview state of 
sensors. All functionality of controller is 
included in the plastic case with leaded 
atop the LED panel with signalizations. 
A communication system carried out 
with a receiver through a radio frequen-
cy of 868.32 MHz.The controller is con-
nected to the Wi-Fi router using a LAN 
cable by completed RJ45 plug.Setting 
and operation via the free application 
installed on your mobile device. EFC-02 
is designed for control within the local 
network. Remote access is available 
only to users who have constant access 
to an IP address and has appropriate 
redirections  on the router. 

THE APPEARANCE

The symbol stands for selective 

collection of electrical and electronic 

devices. Placing used devices with other  

waste is not allowed

EFC-02 Mini

Nominal supply voltage: 5V DC / 1.2 A - standard of Micro USB 

Nominal power consumption: 1.6 W

The type of battery to sustain the clock operation: CR2032

Durability of battery: 5 years

Communication system components of EXTA FREE: Radio f = 868 MHz, unidirectional

Total radio modules: 1

Range: Up to 250m in open area

Possibility to increase the range: Yes - via retransmitter RTN-01

Possibility to connecting an external antenna: No

Communication with mobile devices: 802.11 a / b / g / n - pursued through the

connection with the Wi-Fi router

Connectors: 1 x RJ45 Ethernet port, 1 x Micro USB B 2.0

Firmware upgradeable: Yes - via USB port

Remote sccess service: Only for users with fi xed external IP address 

LEDs: 6 x LED 

Operating temperature: -10 to + 55 ° C

Position: free

Protection degree: IP20 (EN 60529)

Protection class: III

Dimensions: 160 x 100 x 32 mm

Compliance with the standards: PN-ETSI EN 300 220-1, ETSI EN 300 220-2

COOPERATION WITH SEVERAL CONTROLLERS EFC-02

SWITCHING BETWEEN THE CONTROLLERS

●  Application  EFC-02  is  prepared  to  work  with  a  greater  number  of  controllers  working  in  the  local  network.  Such  situation  is  possible

in the case of large objects. 

●  The application automatically searches the start controllers working in a local network. If the number is bigger than> 1 it shows a list of active controllers.  

Controllers are differentiated known by their names. User by pressing the ”Connect” selects the controller to which he wants to be logged.

●  After selecting appears login window and then you need to enter ypur user name and password. If you already saved your login in the application it auto-

matically goes to the main window.

●  For easy switching between several controllers working in the same local network server bookmark ”Switch Controller” available below the icon ”Configu-

ration”. Switching between controllers is available to users in the ”admin” and ”user”. 

●  The procedure is analogous to this as described in the ”Collaboration with several controllers.” 

WARRANTY CARD

There is 24 months guarantee on the product

Salesman stamp and signature, date of sale

1. ZAMEL Sp. z o.o. assures 24 months guarantee for the product.

2. The manufacturer’s guarantee does not cover any of the following actions:

  a) mechanical damage during transport, loading / unloading or under other circumstances,

  b) damage caused by incorrect product mounting or misuse,

  c) damage caused by unauthorised modifi cations made by the PURCHASER or any third parties to the product 

      or any other devices needed for the product functioning,

  d) damage caused by Act of God or any other incidents independent of the manufacturer - ZAMEL Sp z o.o.

  e) supply sources (batteries) included in the device during selling (if they are included).

3. The PURCHASER shall lay any claims in writing to the dealer or ZAMEL Sp. z o.o.

4. ZAMEL Sp. z o.o. is liable for processing any claim according to current Polish legislation.

5. ZAMEL Sp. z o.o. shall process the claim at its own discretion: product repair, replacement ormoney return.

6. The manufacturer’s guarantee is valid in the Republic of Poland.

7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the 

purchase contract or otherwise are not affected by this warranty.

Error indicator SD card

Power connector

Indicator connection USB

RESET button - restore the factory settings

The indicator of receipt

Ethernet socket 

Gear indicator (broadcast)
LAN switch indicator
Power indicator

Reviews: