RESERATOR 1
www.zalman.co.kr www.zalmanusa.com
12
5.6 Confirm Correct Installation
5.7 Add Coolant
1) Check that the placement of the product confirms to section 5.1.
2) Confirm that the coolant circulation path is correct, as shown below.
3) Lightly tug the silicone tube connected to each of the Compression Fittings and the
Universal Fitting to check for loose ends.
1) Take off the Reserator’s cover.
2) Fill the Reserator to 80~90% of its height.
Distilled water is recommended, but
tap water can be used instead.
Reserator 1’s maximum capacity is 2.5
liters. When adding the coolant, make
sure that no contaminant is introduced.
Reserator OUT
Flow Indicator
CPU Water Block
Integrated
Water Pump
Reserator
Reserator IN
GPU Water Block
Radiate Heat
Absorb Heat
Sink Cover
