RESERATOR 1 V2
12
※
The specifications of any product may change without prior notice to improve performance.
5. 11 Confirm Proper Installation
1) Check that the product is placed properly (i.e. conforms to section 5.2).
2) Confirm that the coolant circulation path is correct as shown below.
3) Lightly tug the PVC tube connected to each of the fittings to check for loose ends.
5. 12 Fill the Coolant
1) Take off the Sink Cover on top of the Reserator.
2) Fill with the provided coolant (ZM-G200) and two liters of distilled water.
Note 1)
The provided coolant is a concentrate, and must be mixed down with distilled water
for operation.
Note 2)
Read the warning label on the coolant before use.
Note 3)
Keep this product and its associated system away from children.
Sink Cover
ZM-G200
Distilled Water 2ℓ
Reserator OUT
Water Pump
Reserator
Radiate Heat
Absorb Heat
Flow Indicator
Reserator IN
CPU Water Block
N/B Water Block
VGA Water Block
Summary of Contents for RESERATOR1 V2
Page 18: ......
