ZADI RTS Bike, Instruction Manual, Page: 15 / 26

Dear customer,
thank you for choosing RTS Bike.
The product you purchased is the most innovative in the field of motorcycle tyre monitoring: it complete, accurate and offers very high performance.
It is the result of ZADI continuous research and aims at improving riding safety.
Before installing and using RTS Bike, you should carefully read this manual. It contains important pieces of information for the correct installation
and use of the device
RTS Bike is a real time tyre pressure and temperature monitoring system, specifically developed for two-wheels vehicles. You must consider it a driver's auxiliary device and by no means a
substitute for the ordinary check and maintenance of the tyres.
RTS Bike does not prevent the rider from starting the vehicle if the tyres are flat. The device begins measuring temperature and pressure when wheels turn. Therefore, before starting the vehicle
you must visually check the pressure status of the tyres.
The central unit must be installed in such a way as to prevent it from distracting the person riding the vehicle. Do not make any set-up while riding and stop your vehicle before operating on the
central unit.
In case of tyre burst, tyre very fast deflation or sensor damages due, for example, to a deep road bump, the central unit could eventually not indicate the correct status of the tyre. Should you
suspect an incorrect pressure figure, stop at the nearest service station to check the pressure of all tyres.
The sensors inside the tyres transmit data to the central unit by means of radio waves. In particular conditions (for examples areas with high density of electromagnetic interference) the central
unit could temporarily not receive the pressure data and consequently indicate the absence of the sensors.
The central unit automatically compensate the changes of pressure due to temperature variations inside the tyre. The warning threshold value for low pressure is set at -15% of the memorized
pressure value and is automatically recalculated based on the compensated temperature (see picture no.9)
ZADI declines any responsibility and shall not be liable for any incorrect or not foreseen installation or use of the device. You must carefully follow the installation and use instructions of this
manual.
ZADI declines any responsibility and shall not be liable for any direct or indirect damage caused to persons, objects or animals by the missing observance of any of the instructions of this manual.
Important preliminary information
15
Manuale Istruzioni RCS Bike - ITA/ENG/TED