6. To allow for rods to slide back and forth, loosen 2
red rod levers on each side of the plate. Tighten the
levers when you are finished adjusting rods.
7. Make sure the rods are out far enough so you can
slide on the follow focus and matte box.
8. In some circumstances, in order to slide on the
follow focus, you may need to loosen the front two
red levers to allow for slight movement on the rods.
When the follow focus is in place tighten down those
same red levers.
9. Slide the follow focus onto rods and leave enough
room for later adjustment.
10. Attach the rod mount (black plastic part with rod
holes in it) to the matte box.
11. Some of the
levers on the
matte box and
follow focus
may need to be
adjusted to fit
your setup.
